﻿K&F Type SPECTRA 212 XW

Three-way high-performance speaker with 2 x 12" woofers in a bass-reflex cabinet, 6 x 5" midrange drivers in a closed cabinet and 4 x 1" compression drivers on a waveformer. This ensures a sound reproduction with particularly low distortion over the entire frequency spectrum and very high maximum level. The speaker is processed with two amp channels of a SystemAmp, ensuring the best possible performance and operational reliability. Here, the woofer and tweeter are split on one channel via a patended passive network, and the active processing achieves optimum slope matching of the filters. On the second channel, the midrange drivers are directly processed on a seperate channel. Thus, the woofer and midrange as well as the midrange and tweeter are perfectly coupled in phase. The integrated patended VariQ technology allows the loudspeaker to be used both individually as a point source and in multiples in a line array configuration. The VariQ unit is rotated 90° to change between point source and line source operation. In point source mode, the speaker radiates asymmetrically at 120° horizontally and +5°/-25° vertically, thus reducing unwanted ceiling reflections. An additional switchable filter ensures uniform radiation of the high-frequency section. Optionally, the VariQ can also be used in point-source mode with upward asymmetrical radiation +25°/-5° for rising audiences. In line-source operation, the box radiates 30° horizontally and 120° vertically. Due to the 30° enclosure angle and the integrated connection mechanism, arrays of up to six loudspeakers can be horizontally clustered and flown with a dispersion angle of 180°. Vertically, up to four boxes can be flown as a line array for a coverage angle of 120°. All accessories can be mounted without tools in just a few steps. The housing is made of 15 mm multiplex with heavy-duty polyurea plastic coating. Ergonomic handles for horizontal and vertical transport are located on the base and lid. Four abrasion-resistant plastic gliding feet on the bottom as well as a ball-proof steel grille backed with black acoustic foam complete the box. The recessed connector terminal is fitted with two speakON® 4-pin NLT4MP (1+/1- LF/HF, 2+/2- MF) connectors. 

Technical data: 
Operation with K&F SystemAmp
Frequency range -10 dB: 56 Hz – 20 kHz (Full Range), 83 Hz – 20 kHz (Low Cut)
Frequency range ±3 dB: 65 Hz – 18 kHz (Full Range), 135 Hz – 18 kHz (Low Cut)
Nominal coverage: 30° x 120° (Line Source), 120° x +5°/-25° (Point Source)
Nominal power: 2 x 500 W
Program power: 2 x 1000 W
Peak power: 2 x 2000 W
Maximum SPL (1 m):
138 dB SPL (Point Source)
140 dB SPL (1 x Line Source (30°))
142 dB SPL (2 x Line Source (60°))
143 dB SPL (3 x Line Source (90°))
144 dB SPL (4 x Line Source (120°))
Nominal impedance: 2 x 8 Ω
Speaker per channel: 2 (recommended)/3 (maximum) on two channels
Components: 2 x 12“ LF, 6 x 5“ MF, 4 x 1“ HF
Connectors: 2 x speakON® 4-pol NLT4MP (1+/1- LF/HF , 2+/2- MF)
Dimension (B x H x T): 460 x 800 x 460 mm
Weight: 48 kg
Colour: RAL 9005 (black)